Monitoring and supervising RF signals with PROMAX systems.
are designed to deploy, expand or replace existing monitoring systems. They are built around the professional-choice ( from PROMAX), making them one of the best monitoring and supervising platforms available today for RF signals monitoring, analysis and logging: FM radio, Terrestrial TV, Satellite TV and CATV.
include new technologies such as DVB-T2, H265, 4K UHD, IP TV, etc. They allow setting alarms and pre-alarms based on signal quality parameters, as well as performing the complete remote control of the equipment as if they were physically being held in the hands.
PROMAX are perfect for:
· Entities that watch over the integrity of the spectrum and must detect interference.
· Integration in the broadcasting centers to control the signal that is being transmitted.
· Perform control in teleports to ensure the received SAT signals.
· Operators tracking RF signals transmitted and/or received at each location.
· CATV Critical headers and nodes.
Monitoring all signal parameters
It is possible to monitor and log all the measurements that would be taken with a regular TV analyzer. Power, MER, BER, service display and recording, etc.
The individual control of the system provides access to other functions such as echoes, constellation and many other additional measurements. It is also available the streaming of each service.
In addition, the top-of-range models (PROWATCH Neo 2) can also record and analyze the Transport Stream (TS) in real time.
Telemetry for the control of integrated systems in the transmitter stations
In addition to monitoring equipment, accessory systems as Telemetry modules can be supplied to perform the complete control of integrated systems within a transmitter plant.
PROMAX can provide the MIB files that allow to integrate the monitoring and telemetry systems into a SNMP control system. Drivers for some of the most known managers in Broadcasting (such as Dataminer) are provided.
PROMAX can provide on demand the SNMP manager PROWATCH NMS for controlling the monitoring and telemetry systems.
Portable monitoring or embedded systems monitoring?
is available in both formats:
· systems, embedded in a 1U module for 19” rack mounting.
· , a portable TV signal analyzer with monitoring function.
Integrated management of a network via SNMP
There is the possibility of integrate the whole set of cells via a SNMP manager application to get reports, graphs, etc in an almost infinite number of formats, to show them in a videoworld or to perform queries from anywhere in the world using a computer or a tablet.
There is the possibility of manage each equipment as an independent cell via a Web application. It runs from the Internet browser, not requiring any additional software. This make possible to use them in the same way as if the equipment were in front of the operator. It is just as being there.
Try now the remote control of an actual PROWATCH Neo
We have a PROWATCH Neo+ unit in the PROMAX facilities ready to you to connect to it. You can log in the same way that you would if the unit was part of your own monitoring network.
Telemetry and remote control systems of broadcast stations
PROMAX can provide the remote units for the complete management and telemetry of the equipment installed in radio and television broadcast stations that are located in hard-to-reach areas.
All the necessary resources to monitor and control the transmission, reception and infrastructure parameters are unified under the same user interface.
· Controlling and monitoring equipment and devices, regardless of the manufacturer
· SNMP, GPIO, MODBUS and Serial interfaces
· Safe communications via the “Open VPN” application
· Ethernet and GSM (double SIMCARD) communications
· Redundant communications and power supplies
· Shielded against RF interferences
· Low power consumption
· Shielded inputs and outputs
· Allows to set up to 5 IP addresses (NOC) for communication
What can be done with the monitoring system?
What follows are some screen captures of the :